Smok Novo X User Manual Pdf (2024)

FAQs

What wattage should my Novo X be at? ›

The recommended wattage of this 0.8ohm pod cartridge is 14w - 28w. From the aspect of my personal experience, 14w-18w would be a perfect power range for this pod in conjunction with its fixed airflow.

SMOK Novo X Dual kanthal coil 0.8ohm MTL Best 12-25W

The cherry becomes more prominent adding flavour while the menthol is stronger when vaped at 18W. I found the best results when pushing up to the maximum recommended setting of 25W.

Steps to troubleshoot: Check the Charge: Ensure your device is fully charged. Inspect the Pod Contacts: Remove the pod and examine the contact points. Clean any e-liquid residue that might be obstructing the connection.

If you like a nice, strong throat hit, then use a higher wattage, but if you prefer your vape to be a bit smoother, use a lower wattage.

The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.

For best results, we recommend pairing this kit with a high PG e-liquid that's 50% PG or higher. Contains: Smok Novo X 25W Vape Device. 2 x Novo X 2ml DC Refillable Pods.

If the coil's resistance would cause an unsafe battery draw, the device should display an error message and refuse to work. Error messages like “Ohms Too High” and “Ohms Too Low” indicate that the coil's resistance isn't in the correct range for your device to operate.

This is because the coil isn't working, so the mod cannot read it anymore. Vape coil fitting – The vape coil has to be seated in your vape tank correctly. If it isn't fitted into your tank properly then it will not make a connection to the mod, this can cause an error message.

One of the key elements that enhanced the vaping experience provided by the little Smok Novo is salt nic vape juice. The higher nicotine content compared to traditional e-liquids offers a smoother draw without the harsh throat hit of a high-nicotine freebase.

The number 1 reason for your coil burning out quick is down to human error. Every time you use a brand new coil, it is important to fill up your tank and allow 3-5 minutes for the coil to sit in the e-liquid before you vape it.

What vape settings should I use? ›

300-400 Fahrenheit Vape Settings

In most cases, the best temperature for a vape liquid is between 300-400F (194-204C). The range between 325-350F degrees is the best temperature setting for vapers in our opinion. This range provides the right balance between warmth and not too hot feel.

Condensation and debris

The most likely cause of auto-firing (and an easy fix) is condensation and debris in the pod chamber. If you experience auto-firing, one of the first things you should do is pull out the pod and inspect the inside chamber of the device.

SMOK Wave Not Hitting

It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod. If the pod doesn't firmly touch the connections inside the chamber of the SMOK Wave, the device won't work.

The best wattage for vaping depends entirely on your vaping preferences. For mouth-to-lung vaping, pair high-resistance coils with a wattage of 7-20W. For direct-to-lung inhaling, pair low-resistance coils with a wattage of 40W or more.

If you prefer citrus or menthol flavors, however, you should use a lower wattage to enhance the brightness of those flavors. Clouds: If you want big clouds, you must go with higher wattage and temperature settings. This will wear out your coils quickly, so be prepared to change them frequently.

The best wattage for vape tricks generally ranges between 50 to 100 watts. This range provides a good balance between sufficient vapor production and control, allowing for thicker clouds that are ideal for performing tricks.